Gracias mi buen Luis... el solo hecho de que estemos ligados por medio de lo que hacemos y cómo nos apasiona es suficiente!! Te mando un saludazo y ojalá podamos estar más atentos de nuestros trabajos y del buen desempeño de otros colegas,
Luis...recibe un saludo desde el corazón de Hollywood de parte de otro profesional de la Voz... espero poder y formar parte de ella: de una gran cadena de actores de la voz y locutores profesionales en español... ya que me enorgullece hacer lo que hacemos.
jejeje Gracias ;) Y mira tus fotos muy lindo tambien!! Ese es el gancho verdad!!! Que vean las fotos y luego los audios es el complemento!! Asi se deciden mas rapido!
Not sure what your sound card/audio input setup is, but here's how I have mine setup. It's probably more complex than it needs to be but it works best in my situation.
I have my microphone/preamp patched straight into my MBox. I then run the rear headphone out line into a channel on my mixer. I then run my THAT-1 into another channel on the mixer, and then monitor the whole thing thru the mixer's headphone amp. That way, I get a clean signal going into the computer, and the client still can hear and direct me without interfering in the audio chain. As for the cable, my THAT-1 came with an RCA to 1/8 inch jack which I just add a 1/4" adapter to, and plug it into one of my mixer's channels. If I get a chance this weekend, I'll send you some pictures of how it's setup in my studio.
Hey Luis thanks for the warm welcome. I'm already sensing that joining VU is going to be extremely beneficial. I'm getting some material together so I can line up several "type" specific demos to post on my page. I'll be in touch.
Thanks again.
Comment Wall (31 comments)
You need to be a member of VU to add comments!
Join this social network
Trujo
Saludos,
Trujo
Jenn
Joe Cip
I'll see if I can help you. I'm not good with the audio technical stuff.
My mic goes into my Symetrix. Symetrix hooks into my MBox. MBox goes to my Mackie board. I also have a Telos Zephyr in the mix. I hope this helps.
Caryn
To get an explanation of the BBE Sonic Maximizer, visit this link. http://img3.musiciansfriend.com/dbase/pdf/man/m_180910.pdf
Not sure what your sound card/audio input setup is, but here's how I have mine setup. It's probably more complex than it needs to be but it works best in my situation.
I have my microphone/preamp patched straight into my MBox. I then run the rear headphone out line into a channel on my mixer. I then run my THAT-1 into another channel on the mixer, and then monitor the whole thing thru the mixer's headphone amp. That way, I get a clean signal going into the computer, and the client still can hear and direct me without interfering in the audio chain. As for the cable, my THAT-1 came with an RCA to 1/8 inch jack which I just add a 1/4" adapter to, and plug it into one of my mixer's channels. If I get a chance this weekend, I'll send you some pictures of how it's setup in my studio.
cheers!
Mike
Thanks again.
View All Comments